Sanyo PLC-WM4500/L - 4500 Lumens Manual

Also see for PLC-WM4500: Owner's manual User manual Owner's manual Owner's manual Manual

PLC-WM4500/WM4500L Basic Serial Command Functional Specifications24/26“04” [CR]Status: Power SaveThis indicates it moves to Power-Save status by Power Management function as set in theSetting menu.“21” [CR]Status: Cooling Down in process after OFF due to Lamp FailureWhen the projector is turned off due to lamp failure, it automatically starts Cooling Downoperation. The projector returns “21” [CR]. “21” [CR] has been kept during Cooling Downoperation.“81” [CR]Status: Standby after Cooling Down due to Lamp FailureThe projector has recovered from Lamp Failure status. When the projector enters Standbystatus after Cooling Down operation invoked due to lamp failure, it returns “81”. This indicatesthe status turns to Standby due to lamp failure. This status continues until the next operationis started; when Power On is executed, the projector clears the information of Lamp Failureand normal operation starts.

/ 26

Related manuals for Sanyo PLC-WM4500