Sanyo PLC-WXU30 Owner's Manual

Also see for PLC-WXU30: Owner's manual Brochure Owner's manual Owner's manual Owner's manual

Contents

Sanyo PLC-WXU30 Owner's Manual Manual pdf 36 page image

36Computer InputMove the red frame pointer tothe desired image mode andpress the SELECT button.The selected image mode is check marked.Image Select MenuNormal picture mode preset on the projector.StandardPicture mode with improved halftone for graphics.RealFor the image projected on a blackboard. See above forfurther description.Blackboard(Green)Image Select Menu iconIMAGE buttonDynamicRealImage 1Image Image 3Image Mode SelectionImage For viewing with the user preset image mode in the ImageAdjust Menu (see pages 37-38).Image 1~Blackboard(Green)For viewing pictures in a bright room.DynamicStandardRemote ControlIMAGE buttonSelect the desired image mode from among Dynamic,Standard, Real, Blackboard (Green), Image 1, Image 2,Image 3, and Image 4 by pressing the IMAGE button on theremote control.StandardPicture mode with improved halftone for graphics.RealBlackboard (Green)Image 1–For the image projected on a blackboard.This mode help enhance the image projected on ablackboard. This is mainly effective on a green colored board,not truly effective on a black colored board.DynamicDirect OperationFor viewing pictures in a bright room.Normal picture mode preset on the projector.For viewing with the user preset image mode in the ImageAdjust Menu (see pages 37-38). This Image memory isprovided in each computer, component, and video inputsource.Press the MENU button to display the On-ScreenMenu. Use the Point 7 8 buttons to move the redframe pointer to the Image Select Menu icon.1 Use the Point ed buttons to move the red framepointer to the desired image mode and then press theSELECT button.Menu Operation