Sanyo PLC-WXU30 Owner's Manual

Also see for PLC-WXU30: Owner's manual Brochure Owner's manual Owner's manual Owner's manual

Contents

Sanyo PLC-WXU30 Owner's Manual Manual pdf 59 page image

59CAUTION:WHEN yOU HAVE CHANGED THE PIN CODE, WRITE DOWNTHE NEW PIN CODE IN COLUMN OF THE PIN CODE NO MEMOON PAGE 80, AND KEEP IT SECURELy IF yOU FORGET yOURPIN CODE, SOME SETTINGS OF THE ANTITHEFT ALARMFUNCTION CAN NO LONGER BE CHANGEDChange the PIN codePress the F button and enter the four-digit PIN codenumber within about 10 seconds. The ALARM indicatorblinks red for a few seconds and a high-pitchedconfirmation sound is produced.Other settingsReset the settingsSelect “Factory default” in the Setting menu to reset thesettings for the Antitheft alarm function.1 While the indicator is blinking, enter a new PIN code,then you will hear a high-pitched confirmation soundand the ALARM indicator is turned off.When you enter an incorrect PIN code, you will hear alow-pitched sound. If you enter incorrect PIN code threetimes in a row, the alarm will start ringing.The PIN code for the Antitheft alarm function is acombination of 1, 2, or 3. Use the buttons 1, 2, and 3 toenter the PIN code. The default PIN code is “1111.”✔Note:• This is effective only when the Antitheft alarm setting is released.The Alarm operating configuration can be changed whenthe Antitheft alarm function is set to “Off.” See page 58 forsetting or releasing this function.Press the SELECT button at Alarm icon in the Setting Menuto display the Alarm setting dialog box. Use the Point edbuttons to select the desired option; use the Point 7 8buttons to set the selected option.Battery chargeSee the next page for details.Alarm volumeSmall, Medium, LargeSensitivityLow ..................... Less sensitiveMedium .............. Normal sensitivityHigh ................... Highly sensitive (default)Ringing time10 seconds ........ Rings about 10 seconds (default).60 seconds ........ Rings about 60 seconds.Long time ............ Rings until the end of the battery life.AlarmPress the SELECT button atthe Alarm icon to display theAlarm setting dialog box.✔Notes:• The Alarm icon appears dimmed and can beunavailable when the Antitheft alarm function is setto “On” or if the battery is not installed, discharged, orcoming to the end of its life.• When the “Security” is selected in the Setting menu,the Antitheft alarm setting buttons can be unavailable.• When selecting “Long time” option in the Ringing time,the duration of alarm sounding differs depending on thebattery life.Use the Point 7 8buttons to set theselected option.Alarm operating configurationF button Button 1, , 3Top ControlALARM indicatorRear TerminalAntitheft Alarm Function