Sanyo PLC-WXU30 Owner's Manual

Also see for PLC-WXU30: Owner's manual Brochure Owner's manual Owner's manual Owner's manual

Contents

Sanyo PLC-WXU30 Owner's Manual Manual pdf 40 page image

0Choose Video by pressing the INPUT button on the topcontrol or the VIDEO button on the remote control.Before using these buttons, correct input source should beselected through menu operation as described below.Use the Point ed buttons to move the red arrowpointer to Video and then press the SELECT button todisplay the Source Select Menu.1Move the pointer toVideo and press theSELECT button.VIDEOMove the pointer to the sourcethat you want to select andpress the SELECT button.Source Select Menu (VIDEO)Input MenuMove the pointer to the desired source and then pressthe SELECT button.3Input Source Selection (Video, S-video)Input Menu iconVideo InputComputer 1 (Analog)VideoComputer INPUT buttonVIDEO buttonWiredTop Control INPUT buttonComputer 1 (Digital)Remote ControlDirect OperationMenu OperationPress the MENU button to display the On-ScreenMenu. Use the Point 7 8 buttons to move the redframe pointer to the Input Menu icon.When selecting Auto, the projector automaticallydetects incoming video signal, and adjusts itselfto optimize its performance. The projector selectsconnection in the following order:1. S-video2. VideoAutoWhen video input signal is connected to theVIDEO jack, select Video.VideoWhen video input signal is connected to the S-VIDEO jack, select S-video.S-video✔Notes:• Wired and Wireless are for the Network function. Seethe owner’s manual “Network Set-up and Operation” .• When the Input Search function is set to “On1” or “On2”,the input signal will be searched automatically (p.51).Wireless