Sanyo PLC-WXU30 Owner's Manual

Also see for PLC-WXU30: Owner's manual Brochure Owner's manual Owner's manual Owner's manual

Contents

Sanyo PLC-WXU30 Owner's Manual Manual pdf 64 page image

6Maintenance and CleaningCleaning the Projector CabinetCleaning the Projection LensUnplug the AC power cord before cleaning.Gently wipe the projection lens with a cleaning cloth thatcontains a small amount of non-abrasive camera lenscleaner, or use a lens cleaning paper or commerciallyavailable air blower to clean the lens.Avoid using an excessive amount of cleaner. Abrasivecleaners, solvents, or other harsh chemicals might scratchthe surface of the lens.Unplug the AC power cord before cleaning.Gently wipe the projector body with a soft dry cleaning cloth.When the cabinet is heavily soiled, use a small amount ofmild detergent and finish with a soft dry cleaning cloth. Avoidusing an excessive amount of cleaner. Abrasive cleaners,solvents, or other harsh chemicals might scratch the surfaceof the cabinet.When the projector is not in use, put the projector inan appropriate carrying case to protect it from dust andscratches.When moving this projector or while not using it over anextended period of time, replace the lens cover.Attach the lens cover according to the following procedures.Pass the string through a hole of the lens cover.Turn over the projector and remove the screw with ascrewdriver.Attaching the Lens CoverAttach the string with lens cover to a hole at the bottom ofthe projector and secure it with a screw.123Lens CoverString for the lenscoverSecure it to thehole with a screw.Hole