Sanyo PLC-WXU3ST Owner's Manual

Contents

Sanyo PLC-WXU3ST Owner's Manual Manual pdf 29 page image

9Computer InputAuto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal,and Vertical to conform to your computer. Auto PC Adjustment function can be operated as follows.Auto PC AdjustmentThe Auto PC adjustment function can be operateddirectly by pressing the AUTO PC button on the remotecontrol unit.Direct Operation Remote ControlAUTO PC buttonPress the MENU button to display the On-ScreenMenu. Press the Point ◄► buttons to move the redframed pointer to PC Adjust Menu item.Press the Point ▲▼ buttons to move the red framedpointer to Auto PC Adj. item and then press theSELECT button twice.Auto PC AdjMenu Operation12 Move the red framed pointer tothe Auto PC Adj. item and pressthe SELECT button."Please wait..." message appearswhile Auto PC adjustment is inprocess.PC Adjust MenuPC Adjust Menu iconTo store adjustment parametersAdjustment parameters from Auto PC Adjustment canbe memorized in this projector. Once parameters arememorized, the setting can be done just by selectingMode in the PC System Menu (p.28). See "Store" onpage31.Notes:• Fine sync, Total dots, Horizontal and Verticalposition of some computers cannot be fullyadjusted with the Auto PC Adjustment function.When the image is not provided properly withthis operation, manual adjustments are required(pp.30–31).• The Auto PC Adjustment cannot be operatedwhen 480i, 575i, 480p, 575p, 720p,1035i, or 1080iis selected in the PC System Menu (p.28).