Sanyo PLC-WXU3ST Owner's Manual

Contents

Sanyo PLC-WXU3ST Owner's Manual Manual pdf 36 page image

36Video InputInput Source Selection (Video)PCChoose Video by pressing the INPUT button on the topcontrol or the VIDEO button on the remote control.Before using these buttons, correct input source shouldbe selected through menu operation as describedbelow.Use the Point ▲▼ buttons to move the red arrowpointer to Video and then press the SELECT buttonto display the Source Select Menu.1 Move the pointer toVideo and press theSELECT button.VIDEOMove the pointer to thesource that you wantto select and press theSELECT button.Source Select Menu (VIDEO)Input MenuMove the pointer to the desired source and thenpress the SELECT button.3Input Menu iconComputer 1 (Analog)VideoComputer VIDEO buttonTop Control INPUT buttonComputer 1 (Digital)Remote ControlDirect OperationMenu OperationPress the MENU button to display the On-ScreenMenu. Use the Point ◄► buttons to move the redframe pointer to the Input Menu icon.When selecting Auto, the projectorautomatically detects incoming videosignal, and adjusts itself to optimizeits performance. The projector selectsconnection in the following order:1. S-video2. VideoAutoWhen video input signal is connected tothe VIDEO jack, select Video.VideoWhen video input signal is connected tothe S-VIDEO jack, select S-video.S-videoNotes:• When the Input Search function is set to “On1”or “On2”, the input signal will be searchedautomatically (p.47).