Sanyo PLC-XF10N MOD Owner's Manual

Press the D. ZOOM button on the wireless remote control unit. The "D.zoom"and the magnifying-glass icon is displayed to indicate Digital zoom mode. Digitalzoom mode can be adjust the image size or pan the image.To expand the image size, press SELECT (REAR CLICK) button. The image ismagnified by degrees (Expand function).To compress the image size, press FRONT CLICK button. The size of image isreduced by degrees (Compress function).To pan the image, press POINT UP/DOWN/LEFT/RIGHT (POINTING PAD)button(s). The image move to the direction indicated (Panning function)See the page 49 for more detail.The normal picture image level is factory preset on the projector and can berestored anytime by pressing the NORMAL button on the projector or on theremote control unit. The "Normal" display will be displayed on the screen for afew seconds.Press the FREEZE/NO SHOW button on the remote control unit, and the picture will remain on-screen. This function iscancelled when the FREEZE/NO SHOW button is pressed again or any other button is pressed.NOTE: Your computer or video equipment is not affected by this function, and will continue to run.Press the FREEZE/NO SHOW button (on the remote control unit) is twice. Thescreen will change into black image and the "NO SHOW" is displayed on thescreen for a few seconds.This function is cancelled when the FREEZE/NO SHOW button is pressed againor any other function button is pressed.Press the P-TIMER button on the remote control unit. The timer display "00:00"appears on the screen and the timer starts to count the time (00:00 to 59:59).Press again the P-TIMER button to stop the timer. Then press the P-TIMERbutton to cancel the P-TIMER function.Press the AUTO IMAGE button on the projector or on the remote control unit. The item(s) indicated "ON" in the AUTOIMAGE FUNCTION are adjusted automatically.If all the items in AUTO IMAGE FUNCTION are "OFF", AUTO IMAGE SETTING display appears. If you wish to operatethe AUTO IMAGE FUNCTION, perform the steps 3 - 9 of "AUTO IMAGE FUNCTION" section on page 42.Press the CURSOR button on the wireless remote control unit. The CURSOR isdisplayed on the screen. Press POINT UP/DOWN/LEFT/RIGHT (POINTINGPAD) button(s) to control CURSOR. The CURSOR is moved according to thedirection you are pressing. Press CURSOR button again, and CURSORdisappears.D. zoom34BASIC OPERATIONNO SHOW FUNCTIONNORMAL PICTURE FUNCTIONP-TIMER FUNCTIONFREEZE PICTURE FUNCTIONDIGITAL ZOOM FUNCTIONAUTO IMAGE FUNCTIONCURSOR FUNCTION