Sanyo PLC-XF10N MOD Owner's Manual

52MAIN MENU DISPLAYSETTINGDISPLAYThe Lamp age function is designed to reset the lamp replacement monitor timer. When replacing the lamp, reset the lampreplacement monitor timer by using this function.NOTE: Do not reset the LAMP REPLACEMENT MONITOR TIMER, except after the lamp is replaced.1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.2. Press the POINT LEFT/RIGHT BUTTON(s) to select SETTING and press the SELECT (REAR CLICK) BUTTON.Another dialog box SETTING DISPLAY will appear.3. Press the POINT DOWN BUTTON and a red arrow will appear.4. Move the arrow by pressing the POINT UP/DOWN BUTTON(s) to select Lamp age and then press the SELECT (REARCLICK) BUTTON. When you reset the lamp replace monitor, "lamp replace monitor reset?" is displayed for confirmation.5. Move the arrow to Yes and then press the SELECT (REAR CLICK) BUTTON, "OK?"is displayed for confirmation.Move the arrow to Yes and then press the SELECT (REAR CLICK) BUTTON, the lamp replace monitor is reset.6. Move the arrow to No and then press the SELECT (REAR CLICK) BUTTON. The lamp replace monitor is not reset.7. To quit the MENU, move the arrow to Quit and then press the SELECT (REAR CLICK) BUTTON.OTHER FUNCTION SETTINGLAMP AGE