Sanyo PLC-XF10N MOD Owner's Manual

47COMPUTER MODE163010564743000ITEMCLAMPDISPLAY AREAHORIZ. SCALEFUNCTIONAdjustment of the clamp level. When the image has a dark bar, try this adjustment.Expanding or compressing level for the vertical direction.Expanding or compressing level for the horizontal direction.PC ADJUSTMENTDISPLAY 2MAIN MENU DISPLAY17. Another dialog box "PC ADJUSTMENT DISPLAY 2" will appear and the parameter data for the Mode you have selectedis shown in this dialog box.18. Move the arrow to an item that you want to adjust by pressing the POINT UP/DOWN BUTTON(s).19. To increase the level, point the arrow to s and then press the SELECT (REAR CLICK) BUTTON. To decrease thelevel, point the arrow to t and then press the SELECT (REAR CLICK) BUTTON.20. If you want to store the settings in the memory, move the arrow to Stored and press the SELECT (REAR CLICK)BUTTON. When you have stored the settings, "OK ?" is displayed for confirmation. Move the arrow to Yes and thenpress the SELECT (REAR CLICK) BUTTON.21. To recall the parameter data before setting, move the arrow to Reset and then press the SELECT (REAR CLICK)BUTTON. When you have reset the settings, "OK ?" is displayed for confirmation. Move the arrow to Yes and thenpress the SELECT (REAR CLICK) BUTTON. You can adjust the settings again if needed.22. To quit the MENU, move the arrow to Quit and then press the SELECT (REAR CLICK) BUTTON.23. If you quit the MENU without storing the settings in the memory, the parameter data you changed will not be kept.24. The stored settings are memorized even if the MAIN ON/OFF is switched off.VERT. SCALEAdjustment the display area to match your PC.Adjust the display area, move the arrowby pressing the POINT UP/DOWNBUTTON(s) to select ( ) and press theSELECT (REAR CLICK) BUTTON.Another dialog box "DISPLAY AREADISPLAY" will appear.Move the arrow to an item that you wantto select display area by pressing thePOINT UP/DOWN BUTTON(s) andpress the SELECT (REAR CLICK)BUTTON.Selected mode data will be displayed inH, V box.To close dialog, move the arrow to"Quit" and press the SELECT (REARCLICK) BUTTON.FINE SYNC Adjust the picture as necessary to eliminate flicker from the display.640 X 480720 X 400800 X 6001024 X 7681152 X 8641280 X 1024