Sanyo PLC-XK2600 Owner's Manual

Also see for PLC-WK2500: Manual Manual Manual Specification sheet Service manual

Sanyo PLC-XK2600 Owner's Manual Manual pdf 36 page image

36Video InputChoose Video or S-video by pressing the VIDEO or theS-VIDEO button on the remote control.Before using these buttons, correct input source shouldbe selected through menu operation as described below.12VideoInput Source Selection (Video, S-video)Direct OperationWhen video input signal is connected to theVIDEO jack, select Video.VideoWhen the input source is coming from videoequipment connected to the COMPUTERIN 1/S-VIDEO IN/COMPONENT IN terminalwith a S-video-VGA cable, select S-video.S-videoNote:When the Input Search function is set toOn 1 or On 2 in the Auto setup function, theinput signal will be searched automatically(p.45).Remote ControlVIDEO buttonPress the MENU button to display the On-ScreenMenu. Use the Point ▲▼ buttons to select Inputand then press the Point ► or the SELECT button.Use the Point ▲▼ buttons to select Video and thenpress the SELECT button.S-VIDEO buttonVideoS-videoUse the Point ▲▼ buttons to select Computer 1. Andthen press the Point ► button to access the submenuitems. Use the Point ▲▼ buttons to select the S-videoand then press the SELECT button.Computer1Menu OperationS-videoPress the Point ▲▼ buttons toselect S-video.