Sanyo PLC-XK2600 Owner's Manual

Also see for PLC-WK2500: Manual Manual Manual Specification sheet Service manual

Sanyo PLC-XK2600 Owner's Manual Manual pdf 6 page image

6Safety InstructionsOpenings in the cabinet are provided for ventilation. Toensure reliable operation of the product and to protect itfrom overheating, these openings must not be blockedor covered.CAUTIONHot air is exhausted from the exhaust vent. When usingor installing the projector, the following precautionsshould be taken.– Do not put any flammable object or spray can nearthe projector, hot air is exhausted from the ventilationholes.– Keep the exhaust vent at least 3’ (1 m) away fromany objects.– Do not touch a peripheral part of the exhaust vent,especially screws and metallic parts. These areas willbecome hot while the projector is being used.– Do not put anything on the cabinet. Objects put on thecabinet will not only get damaged but also may causefire hazard by heat.– Make sure that there is no object under the projectorto prevent from covering the bottom openings.Cooling fans are provided to cool down the projector.The fans’ running speed is changed according to thetemperature inside the projector.Moving the ProjectorWhen moving the projector, retract the adjustable feetto prevent damage to the cabinet and use a suitablecarrying case.When this projector is not in use for an extendedperiod, put it into a suitable case to protect theprojector.Air CirculationExhaust Vent(Hot air exhaust)Do not tilt the projector more than 30degrees from above and below.Do not point the projector up toproject an image.Do not point the projector down toproject an image.Do not put the projector on either sideto project an image.Install the projector properly. Improper installation mayreduce the lamp life and cause a fire hazard.Installing the Projector in ProperPositionDo not tilt the projector more than 0degrees from side to side.20°20°30°30°CAUTION IN CARRYING ORTRANSPORTING THE PROjECTOR– Do not drop or bump the projector, otherwise damagesor malfunctions may result.– When carrying the projector, use a suitable carryingcase.– Do not transport the projector by courier or any othertransport service in an unsuitable transport case. Thismay cause damage to the projector. For informationabout transporting the projector by courier or any othertransport service, consult your dealer.– Do not put the projector in a case before the projector iscooled enough.Air Intake VentAir Intake Vent(Filter)