Sanyo PLC-XM100 Owner's Manual

Also see for PLC-XM100: Specification sheet Specifications Specifications Network manual Manual

Contents

14ᶒᶑᶕᶓᶔᶔ ZOOM Ÿź buttonsZoom in and out the images (p.29).ᶑ D.ZOOM buttonSelect the Digital zoom +/- mode and resize theimage (p.43).ᶕ FOCUS buttonsAdjust the focus (p.29).ᾛ FILTER buttonScroll the filter (p.30).ᾧ FREEZE buttonFreeze the picture on the screen (p.30).ᶓ KEYSTONE buttonCorrect keystone distortion (pp.31, 44, 50).ᶖ RESET/ON/ALL-OFF switchWhen using the remote control, set this switch to“ON”. Set it to “ALL OFF” for power saving whenit is not in use. Slide this switch to “RESET” toinitialize the remote control code.ᾩ R-CLICK buttonAct as the right mouse button for wireless mouseoperation (p.32).ᾦ LENS SHIFT buttonSelect the Lens Shift function (p.29).ᾨ P-TIMER buttonOperate the P-timer function (p.30).ᾪᾫ NUMBER buttonsAct as number buttons. Use these buttons whensetting the remote control codes (p.16) or whenentering the PIN code numbers (pp. 23, 54, 60).ᾦᾛᶖᾧᾨᾪ POINTER buttonAct as the On-Off switch for the Pointer (pp.30, 32).ᾫFor PIN codeand remotecontrol code.Part Names and Functionsᾩᶒ INPUT 1- 3 buttonsSelect an input source (INPUT 1 – INPUT 3)(pp.33-35).Remote Control