Sanyo PLC-XM100 Owner's Manual

Also see for PLC-XM100: Specification sheet Specifications Specifications Network manual Manual

Contents

31Remote ControlPOINT ŸźŻŹbuttonsKEYSTONE buttonBasic OperationIf a projected picture still has keystone distortion after pressingthe AUTO PC button on the remote control, correct the imagemanually as follows:Press the KEYSTONE button on the remote control to switch theStandard (for Vertical/Horizontal) /Corner correction adjustment.The Standard or Corner correction adjustment dialog box appears.Use the Point ŸźŻŹ buttons to correct the Standard or Cornerdistortion. The Standard or Corner correction adjustment can bestored (see pages 44, 50).Note:• The white arrows indicate that there is no correction.• A red arrow indicates the direction of correction.• An arrow disappears at the maximum correction.• If you press and hold the KEYSTONE button formore than 3 seconds while the Standard or Cornercorrection dialog box is being displayed, theStandard or Corner correction adjustment will bereleased.• The Corner pattern can be set to Off, Red, White orBlue in the Corner pattern function. See "Keystone"on pages 44, 50.• The adjustable range is limited depending on theinput signal.• Standard and Corner correction functions cannotbe adjusted at the same time. If one of the fuctionsis adjusted, and then the other one will be resetautomatically.Reduce the top left corner partwith the Point Źź buttons.KeystoneReduce the top right corner partwith the Point Żź buttons.Keystone KeystoneKeystoneReduce the bottom left cornerpart with the Point ŹŸ buttons.Reduce the bottom right cornerpart with the Point ŻŸ buttons.Press the KEYSTONE button on the remote control to switchCorner correction adjustment, press the SELECT button on theremote control to select the corner you want to adjust.Reduce the right partwith Point Ź button.Reduce the upper widthwith the Point Ÿ button.Reduce the left part withPoint Ż button.Reduce the lower widthwith the Point ź button.Press the SELECTbuttonPress the SELECTbuttonPress the SELECTbuttonPress the SELECTbuttonKeystone KeystoneKeystionThe top left corner adjustment as an example:Press the Point źbuttonPress the Point ŹbuttonKeystone CorrectionStandardCorner correction