Sanyo PLC-XP30 Owner's Manual

Also see for PLC-XP30: Comparison chart Comparison chart Specifications User manual

Sanyo PLC-XP30 Owner's Manual Manual pdf 33 page image

33VIDEO MODESELECTING COLOR SYSTEMPress the MENU button and the ON-SCREEN MENU willappear. Press the POINT LEFT/RIGHT buttons to selectSYSTEM and press the SELECT button. Another dialog boxSYSTEM MENU will appear.Press the POINT DOWN button and a red-arrow icon willappear. Move the arrow to "Auto", and then press the SELECTbutton.12The projector automatically detects the incoming Video system, andadjusts itself to optimize its performance.When the Video System is PAL-M or PAL-N, select the systemmanually.If the projector cannot reproduce the proper video image, it isnecessary to select a specific broadcast signal format among PAL,SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.Move the arrow tothe Mode and pressthe SELECT button.This box indicates thesystem being selected.Move the arrow tothe Mode and pressthe SELECT button.This box indicates thesystem being selected.AutoPAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-NThe projector automatically detects the incoming Video signal, andadjusts itself to optimize its performance.If the projector cannot reproduce the proper video image, it isnecessary to select a specific component video signal format among480i, 575i, 480p, 575p, 720p, 1035i and 1080i.AutoCOMPONENT VIDEO SIGNAL FORMATVIDEO SIGNAL FROM VIDEO JACK OR S-VIDEO JACKVIDEO SIGNAL FROM Y, Pb/Cb, Pr/Cr JACKS