Sanyo PLC-XP30 Owner's Manual

Also see for PLC-XP30: Comparison chart Comparison chart Specifications User manual

Sanyo PLC-XP30 Owner's Manual Manual pdf 34 page image

34VIDEO MODEPICTURE IMAGE ADJUSTMENTEach of the keys operates as follow.Press the MENU button and the ON-SCREEN MENU willappear. Press the POINT LEFT/RIGHT buttons to select IMAGEand press the SELECT button. Another dialog box IMAGEMENU will appear.1Closes IMAGE MENU.Point to button to lighten the image, and select to deepen theimage. (From 0 to 63.)Point to button to increase purple, and select to increase green.(From 0 to 63.)Point to button to decrease contrast, and select to increasecontrast. (From 0 to 63.)Point to button to darken the image, and select to brighten theimage. (From 0 to 63.)Recalls the data previously adjusted.ResetStores the data in the memory.StoredCloses IMAGE MENU.QuitPoint to button to soften the image, and select to sharpen theimage. (From 0 to 31.)ColorTintContrastBrightnessSharpnessMove the arrow to the color that you want to adjust. Point to tolighten the color and select to deepen the color. (From 0 to 63.)White balance (Red / Green / Blue)Set “On” to reduce the noise (rough parts) of the image.Noise reductionWhen selecting “,” the custom setting dialog box will appear. Movethe arrow to the item that you want to change by pressing the POINTUP/DOWN button, and adjust each value or change the setting On orOff by pressing the SELECT button to match with the image.2 Press the POINT DOWN button and a red-arrow icon willappear. Move the arrow to the function that you want to selectand then press SELECT button.Normal picture level preset on this projector. This picture level canbe set by pressing the NORMAL button.StandardPicture level adjusted for the picture with fine tone.CinemaPicture level adjusted manually in the custom setting dialog box.CustomMove the arrow to or and pressSELECT button.NOTE : The Noise Reduction cannot be operatedwhen the video signal is from the Y,Pb/Cb, Pr/Cr jacks.The Progressive cannot be operated when“480p,” “575p,” “720p,” “1035i,” “1080i-50”or “1080i-60” is selected on SYSTEMMENU (P33).Move the arrow to the itemand press the SELECTbutton.Press the SELECT buttonat “” to adjust the picturelevel manually.Press the SELECT but-ton to set the function“On” or “Off.”Set “On” to provide progressive scan mode.ProgressiveThe level being selected.