Sanyo PLC-XP30 Owner's Manual

Also see for PLC-XP30: Comparison chart Comparison chart Specifications User manual

Sanyo PLC-XP30 Owner's Manual Manual pdf 8 page image

SETTING-UP THE PROJECTOR8PREPARATIONThis projector uses nominal input voltages of 100-120 Vor 200-240 V AC. The projector automatically selects thecorrect input voltage. It is designed to work with single-phase power systems having a grounded neutralconductor. To reduce the risk of electrical shock, do notplug into any other type of power system.Consult your authorized dealer or service station if youare not sure of the type of power supply being in use.Connect the projector with the peripheral equipmentbefore turning the projector on. (Refer to pages 11 ~ 14for connection.)CAUTIONFor safety, unplug the AC Power Cord when the appli-ance is not used.When this projector is connected to the outlet with theAC Power Cord, the appliance is in Stand-by Modeand consumes a little electric power.CONNECTING THE AC POWER CORDConnect the AC Power Cord (supplied)to the projector.The AC outlet must be near thisequipment and must be easilyaccessible.To the POWER CORDCONNECTOR on theprojector.Projector side AC Outlet sideGroundNOTE ON THE POWER CORDThe AC Power Cord must meet the requirement of the country where you use the projector.Confirm the AC plug type with the chart below and the proper AC power cord must be used.If the supplied AC Power Cord does not match the AC outlet, contact your sales dealer.To the AC Outlet.(120 V AC)For Continental EuropeFor the U.S.A. and Canada For the U.K.To the AC Outlet.(200 - 240 V AC)To the AC Outlet.(200 - 240 V AC)