Sanyo PLC-XU25 Owner's Manual

Also see for PLC-XU25: Specifications

Contents

14Part Names and FunctionsThis projector has eight different remote control codes (Code 1-Code 8); the factory-set, initial code (Code 1) and the otherseven codes (Code 2 to Code 8). This switching function prevents remote control interference when operating severalprojectors or video equipment at the same time. (Change the remote control code for the projector first before changingthat for the remote control. See “Remote control” on page 40.)While pressing the MENU button, press the IMAGE buttonnumber of times corresponding to each remote control codenumber. Each time you press the IMAGE button, the code ischanged sequentially. (See the list below.)1To initialize the remote control code for the remote control,slide the RESET/ON/ALL-OFF switch to the RESET, and thento the ON. The initial code is Code 1.2Remote Control CodeWhile pressing the MENU button,press the IMAGE button number oftimes corresponding to the remotecontrol code for the projector.Remote Control Code Number of Times ofPressing IMAGE ButtonCode 1 1Code 2 2Code 3 3Code 4 4Code 5 5Code 6 6Code 7 7Code 8 8MENU buttonIMAGE buttonThe remote control can be used as a wireless mouse for your computer. Before operating the wireless mouse, connectyour computer and the projector with the supplied USB cable. (See page 17 for connection.) When the Pointer function isused, the wireless mouse is not available.Wireless Mouse OperationMove the pointer on the screenwith this button.PRESENTATION POINTER buttonR-CLICK buttonL-CLICK button Acts as right click while theprojector and a computer areconnected with a USB cable.Acts as left click while theprojector and a computer areconnected with a USB cable.