Sanyo PLC-XU25 Owner's Manual

Also see for PLC-XU25: Specifications

Contents

3To the OwnerCAUTION : TO REDUCE THE RISK OF ELECTRICSHOCK, DO NOT REMOVE COVER (ORBACK). NO USER-SERVICEABLE PARTSINSIDE EXCEPT LAMP REPLACEMENT.REFER SERVICING TO QUALIFIEDSERVICE PERSONNEL.THIS SYMBOL INDICATES THAT DANGEROUSVOLTAGE CONSTITUTING A RISK OF ELECTRICSHOCK IS PRESENT WITHIN THIS UNIT.THIS SYMBOL INDICATES THAT THERE AREIMPORTANT OPERATING AND MAINTENANCEINSTRUCTIONS IN THE OWNER'S MANUAL WITHTHIS UNIT.CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENBefore operating this projector, read this manual thoroughlyand operate the projector properly.This projector provides many convenient features andfunctions. Operating the projector properly enables you tomanage those features and maintains it in better condition fora considerable time.Improper operation may result in not only shortening theproduct-life, but also malfunctions, fire hazard, or otheraccidents.If your projector seems to operate improperly, read thismanual again, check operations and cable connections and trythe solutions in the “Troubleshooting” section in the end ofthis booklet. If the problem still persists, contact the dealerwhere you purchased the projector or the service center.Safety PrecautionWARNING : TO REDUCE THE RISK OF FIRE OR ELECTRICSHOCK, DO NOT EXPOSE THIS APPLIANCETO RAIN OR MOISTURE.– This projector produces intense light from the projectionlens. Do not stare directly into the lens as possible. Eyedamage could result. Be especially careful that children donot stare directly into the beam.– Install the projector in a proper position. If not, it mayresult in a fire hazard.– Provide appropriate space on the top, sides and rear of theprojector cabinet for allowing air circulation and cooling theprojector. Minimum clearance must be maintained. If theprojector is to be built into a compartment or similarlyenclosed, the minimum distances must be maintained. Donot cover the ventilation slot on the projector. Heat build-up can reduce the service life of your projector, and canalso be dangerous.– The remote control, supplied to this projector, emits thelaser beam as the Laser pointer function from laser lightwindow while pressing the LASER button (for 1 minute /Signal Emission indicator lights red to indicate laseremission). Do not look into the laser light window or shinethe laser beam on a mirror, yourself or other people. Eyedamage may result.– Do not put any flammable object or spray can near theprojector, hot air is exhausted from the ventilation holes.– If the projector is not to be used for an extended time,unplug the projector from the power outlet.READ AND KEEP THIS OWNER'S MANUAL FOR LATERUSE.20cm50cm 50cm 50cmSIDE and TOP REARCAUTIONNot for use in a computer room as defined in the Standard forthe Protection of Electronic Computer/Data ProcessingEquipment, ANSI/NFPA 75.Ne puet être utillisé dans une salle d’ordinateurs telle quedéfinie dans la norme ANSI/NFPA 75 Standard for Protectionof Electronic Computer/Data Processing Equipment