Sanyo PLC-XU25 Owner's Manual

Also see for PLC-XU25: Specifications

Contents

28Computer InputSelect the resolution at the Display area dialog box.Display areaAdjusts the horizontal area displayed by this projector. Press thePoint Left/Right button to decrease/increase value and then press theSELECT button.Display area HAdjusts the vertical area displayed by this projector. Press the PointLeft/Right button to decrease/increase value and then press theSELECT button.Display area VWhen this function is on, SXGA image is fully displayed at 4 : 3 aspectratio. It is displayed at 5 : 4 aspect ratio with this function off.Full screenResetStoreCloses the PC Adjust Menu.QuitTo store adjustment data, move the red frame pointer to the Storeicon and then press the SELECT button. Move the red arrow pointerto any of Mode 1 to 5 in which you want to store and then press theSELECT button.Resets all adjustment to their previous levels.Mode freeVacant Mode shows values of “Total dots,”“Horizontal,” “Vertical,”“Display area H,” and “Displayarea V.”closes this dialog box.To store adjustment dataTo clear adjustment dataTo clear adjustment data previously set, move the red frame pointerto the Mode free icon and then press the SELECT button. Move thered arrow pointer to the Mode that you want to clear and then pressthe SELECT button.Display areaPress the SELECT button atthe Display area icon and theDisplay area dialog boxappears.This Mode has parameters being stored.NOTE Auto PC Adjust, Display area, Display area (H/V), and Full screen cannot beselected when “480i”, “575i”, “480p”, “575p”, “720p”, “1035i”, or“1080i” is selected in the PC System Menu (p25).