Sanyo PLC-XU25 Owner's Manual

Also see for PLC-XU25: Specifications

Contents

26Computer InputAuto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical to conform toyour computer. Auto PC Adjustment function can be operated as follows.Press the MENU button and the On-Screen Menu will appear.Press the Point Left/Right button to move the red frame pointerto the PC Adjust Menu icon.12 Press the Point Down button to move the red frame pointer tothe Auto PC Adj. icon and then press the SELECT button twice.This Auto PC Adjust can also be executed by pressing the AUTOPC button on the remote control.Move the red frame pointer tothe Auto PC Adj. icon andpress the SELECT button.PC Adjust MenuAuto PC Adj.PC Adjust Menu iconTo store adjustment dataAdjustment parameters from Auto PC Adjustment can be memorizedin this projector. Once parameters are memorized, the setting can bedone just by selecting Mode in the PC System Menu (p25). See“Store” on page 28.NOTE The PC Adjust Menu cannot be operated when the input signal is digital, asignal compatible with HDCP, or a memory card is installed into Multi CardImager. The Auto PC Adjust cannot be operated when 480i, 575i, 480p, 575p, 720p,1035i, or 1080i is selected in the PC System Menu.Computer Adjustment (Auto)Automatically adjusts Fine sync, Total dots, Horizontal, and Vertical forthe input signal from your computer.