3Where to store?StoreVacantThis mode has storedparameters.Note:• Display area (H/V) cannot be selected when 0i, 55i, 0p, 55p, 0p, 1035i or 100i is selected in the PCSystem Menu (p.31).• PC adjust Menu cannot be selected when Computer (PC digital) is selected in the Input Menu (p.30).Press SELECT button tostore adjusted dataValues of Total dots, Horizontal,Vertical, Display area H andDisplay area V.Press MENU buttonto close this dialogbox.Computer InputStoreTo store the adjusted data, select Store and then press thePoint ► or the SELECT button. Move the highlight to one ofthe Modes 1 to 5 in which you want to store, and then pressthe SELECT button.Mode freeTo clear the stored data, select Mode free and then pressthe Point ► or the SELECT button. Move the highlight to theMode that you want to clear and then press the SELECTbutton.ResetTo reset the adjusted data, select Reset and press theSELECT button. A confirmation box appears and then selectyes. All adjustments will return to their previous figures.Mode freeStore
