3Video InputImage Adjustment1Press the Point ◄ button to decrease the contrast; press thePoint ► button to increase the contrast (from 0 to 63).Press the Point ◄ button to decrease the brightness; pressthe Point ► button to increase the brightness (from 0 to 63).ContrastBrightnessPress the Point ◄ button to lighten red tone; press the Point► button to deepen red tone (from 0 to 63).white balance (Red)Press the Point ◄ button to lighten green tone; press thePoint ► button to deepen green tone (from 0 to 63).white balance (Green)Press the Point ◄ button to lighten blue tone; press thePoint ► button to deepen blue tone (from 0 to 63).white balance (Blue)Use the Point ◄► buttons to select the desired Color temp.level (High, Mid, Low or XLow).Color temp.Press the Point ◄ button decrease the intensity of the color;press the Point ►button increase the intensity of the color(from 0 to 63).Press the Point ◄► buttons to adjust the tint value to get aproper color balance (from 0 to 63).ColorTintNote:• When white balance Red, Green or Blue is adjusted, the Color temp. level will change to User.• Tint cannot be selected when the video system is PAL, SECAM, PAL-M or PAL-N (p.41).• When Blackboard(Green) or Colorboard is selected in Image select, Color temp. will change toBlackboard or Colorboard.Image Adjust MenuResetStoreSelected Image modePress the MENU button to display the On-ScreenMenu. Use the Point ▲▼ buttons to select ImageAdjust and then press the Point ► or SELECT button.Use the Point ▲▼ buttons select the desired itemand then press the SELECT button to display theadjustment dialog box. Use the Point ◄► buttons toadjust the setting value.ResetStoreUse the Point ◄►buttons to adjust thesetting value.