Sanyo PLC-XU305A Owner's Manual

Contents

0Video InputChoose Computer 1(Component) or Computer 1(Scart) by pressing the INPUT button on the top control orpress the COMPUTER button on the remote control.Before using these buttons, correct input source should be selected through Menu operation as describedbelow.1 Input Menu Use the Point ▲▼ buttons to select Computer 1 andthen press the Point ► button.Input Source Selection (Component, RGB Scart 1-pin)When the input source is coming from videoequipment connected to the COMPUTERIN 1/COMPONENT IN terminal with aComponent-VGA Cable, select Component.ComponentWhen the input source is coming from videoequipment connected to the COMPUTERIN 1/COMPONENT IN terminal with a Scart-VGA Cable, select RGB (Scart).RGB (Scart)Direct OperationMenu OperationPress the MENU button to display the On-ScreenMenu. Use the Point ▲▼ buttons to select Input andthen press the Point ► or SELECT button.Note:• Network is for the Network function. See owner’smanual “Network Set-up and Operation” .• When the Input Search function is set to On1 or On,the input signal will be searched automatically (p.47).COMPUTER buttonTop Control INPUT buttonRemote ControlWired 1RGBRGB(PC digital)3 Use the Point ▲▼ buttons to select Component orRGB(Scart) and then press the SELECT button.Computer 1VideoS-videoComputer Computer 1Computer NetworkWired 1RGBRGB(PC digital)