Sanyo PLC-XU355A - 3500 Manual

Also see for 3000 ANSI LUMENS PLC-XU305: Brochure Specifications Specifications Datasheet Owner's manual

Contents

PLC-XU305/355 Expand Serial Command Functional Specifications15/687. Error Code TableError Code Contents?-When the received data cannot be decoded-Parameter determination error (digit number error,including invalid value, etc.)101 The function is not available in the selected Mode102 Selected value is out of range (Not reflected)103 Command mismatched to Hardware (command forOptional function which is not installed)201 When reached upper or lower limit of increasing ordecreasing data301 Command cannot be executed during capturingdisplay. Resend the command after a while302 Command cannot be executed during Auto PCoperation. Resend the command after a while303Command cannot be executed while Memory CardViewer is in process. Resend the command after awhile402 Command cannot be executed during PIN codeoperation. Resend the command after a while.Note) These error codes are applied to Expand Command, not to Basic Command