PLC-XU4000 Expand Serial Command Functional Specifications27 / 748.6.3 CF_INPUT1 CommandCommand “CF_INPUT1_%1_”[CR]%1“ANALOG” ---------- Select Analog RGB Input“YPBPR” ------------ Select Component“S VIDEO” -------- Select S-Video Input“SCART” ------------- Select SCARTDetails Select Computer 1 input and source specified by %1 at the same time.This command is available in normal Power ON status.Acceptable “000”[CR]ResponseUnacceptable “Error Code”[CR]8.6.4 CF_INPUT2 CommandCommand “CF_INPUT2_%1_”[CR]%1 “ANALOG” ---------- Select Analog RGB InputDetailsSelect Computer 2 input and source specified by %1 at the same time.This command is available in normal Power ON status.Projector returns “101” by selecting Computer 2 while Monitor out is selected inTerminal menu.Acceptable “000”[CR]ResponseUnacceptable “Error Code”[CR]8.6.5 CF_INPUT3 CommandCommand “CF_INPUT3_%1_”[CR]%1 “VIDEO” ----------------- Select Composite video InputDetails Select Video input. This command is available in normal Power ON status.Acceptable “000”[CR]ResponseUnacceptable “Error Code”[CR]8.6.6 CF_INPUT4 CommandCommand “CF_INPUT4_%1_”[CR]%1 “S-VIDEO” ----------------- Select S-video InputDetails Select S-video input. This command is available in normal Power ON status.Acceptable “000”[CR]ResponseUnacceptable “Error Code”[CR]
