Sanyo PLC-XU4000 - 4000 Lumens Manual

Also see for PLC-XU4000: Specification sheet Owner's manual Manual Dimensional drawing Command list

Contents

PLC-XU4000 Expand Serial Command Functional Specifications43 / 748.10.19 CF_CCAPTIONCOLOR CommandCommand “CF_CCAPTIONCOLOR_%1”[CR]%1 “COLOR” ------- Select Color“WHITE” -------- Select WhiteDetailsSelect color of Closed caption.The status set with this command is stored in EEPROM and its setting is effectiveeven after ALL is OFF.This command is available in normal Power ON status.Closed caption is available under conditions below;Entered signal is appropriate (Video, NTSC signal of S-video) and System is fixedto NTSC.Acceptable “000”[CR]ResponseUnacceptable “Error Code”[CR]8.10.20 CF_RCODE CommandCommand “CF_RCODE_%1”[CR]%1"001” --------------------------- Select Code1"002” --------------------------- Select Code2“UP” --------------- The same operation as pressing Up key or Left key“DN” --------------- The same operation as pressing Down key or Right keyDetailsSelect Code of Remote ControlThe status set by this command is stored in EEPROM and its setting is effectiveafter ALL is OFFThis command is available in normal Power ON status.Acceptable “000”[CR]ResponseUnacceptable “Error Code”[CR]8.10.21 CF_KEYDIS CommandCommand “CF_KEYDIS_%1”[CR]%1“NONE” ----------------------- RC & Projector keys are valid (All are valid)“RC” ---------------------------- RC keys are invalid“KEY” -------------------------- Projector keys are invalidDetails Disable RC/Projector keysThis command is available in normal Power ON status.Acceptable “000”[CR]ResponseUnacceptable “Error Code”[CR]