Sanyo PLC-XU4000 - 4000 Lumens Manual

Also see for PLC-XU4000: Specification sheet Owner's manual Manual Dimensional drawing Command list

PLC-XU4000 Basic Serial Command Specifications15/236.34. Direct on Setting CommandCommand “C28” [CR]Detail Enable Direct on function.This status is stored in EEPROM and retained regardless of Power OFF/ON.Acceptable [ACK] [CR]ResponseUnacceptable “ ”[CR]6.35. Direct on Cancel CommandCommand “C29” [CR]Detail Cancel Direct on function.This status is stored in EEPROM and retained regardless of Power OFF/ON.Acceptable [ACK] [CR]ResponseUnacceptable “ ”[CR]6.36. Power Management Ready CommandCommand “C2A” [CR]Detail Set Power Management to Ready mode.This status is stored in EEPROM and retained regardless of Power ON/OFF.Acceptable [ACK] [CR]ResponseUnacceptable “ ”[CR]6.37. Power Management OFF CommandCommand “C2B” [CR]Detail Set Power Management to OFF mode.This status is stored in EEPROM and retained regardless of Power ON/OFF.Acceptable [ACK] [CR]ResponseUnacceptable “ ”[CR]6.38. Power Management Shut down CommandCommand “C2E” [CR]Detail Set Power Management to Shut down mode.This status is stored in EEPROM and retained regardless of Power OFF/ON.Acceptable [ACK] [CR]ResponseUnacceptable “ ”[CR]6.39. D.ZOOM + CommandCommand “C30” [CR]Detail Enter Digital Zoom mode and expand image size.This command works the same way as “D.ZOOM ▲” button of the remote control.Acceptable [ACK] [CR]ResponseUnacceptable “ ”[CR]