Sanyo PLC-XU4000 - 4000 Lumens Manual

Also see for PLC-XU4000: Specification sheet Owner's manual Manual Dimensional drawing Command list

PLC-XU4000 Basic Serial Command Specifications17/236.46. POINTER DOWN CommandCommand “C3D” [CR]Detail Move down the Pointer of On-Screen Display Menu.This command works the same way as the pointer “▼” of the projector.Acceptable [ACK] [CR]ResponseUnacceptable “ ”[CR]6.47. ENTER CommandCommand “C3F” [CR]Detail This command works the same way as “SELECT” button of the projector andremote control.Acceptable [ACK] [CR]ResponseUnacceptable “ ”[CR]6.48. FREEZE ON CommandCommand “C43” [CR]DetailFreeze on-screen image.This command works the same way as “FREEZE” button of the remote control forFreeze ON, but does not work for Freeze OFF.Acceptable [ACK] [CR]ResponseUnacceptable “ ”[CR]6.49. FREEZE OFF CommandCommand “C44” [CR]DetailCancel Freeze mode.This command works the same way as “FREEZE” button of the remote control forFreeze OFF, but does not work for Freeze ON.Acceptable [ACK] [CR]ResponseUnacceptable “ ”[CR]6.50. Computer 1 Analog RGB CommandCommand “C50” [CR]DetailSelect Analog RGB input in Computer 1.Although projector returns “OK”, Input search is not executed with this commandwhile Input search is set to On1 or On2,Acceptable [ACK] [CR]ResponseUnacceptable “ ”[CR]6.51. Computer 1 Scart CommandCommand “C51” [CR]DetailSelect Scart input in Computer 1Although projector returns “OK”, Input search is not executed with this commandwhile Input search is set to On1 or On2,Acceptable [ACK] [CR]ResponseUnacceptable “ ”[CR]