Sanyo PLC-XU4000 - 4000 Lumens Manual

Also see for PLC-XU4000: Specification sheet Owner's manual Manual Dimensional drawing Command list

PLC-XU4000 Basic Serial Command Specifications16/236.40. D.ZOOM – CommandCommand “C31” [CR]Detail Enter Digital Zoom mode and reduce image size.This command works the same as “D.ZOOM ▼” button of the remote control.Acceptable [ACK] [CR]ResponseUnacceptable “ ”[CR]6.41. S-Video CommandCommand “C34” [CR]DetailSelect S-Video input.Although projector returns “OK”, Input search is not executed with this commandwhile Input search is set to On1 or On2,Acceptable [ACK] [CR]ResponseUnacceptable “ ”[CR]6.42. Image Colorboard CommandCommand “C39” [CR]Detail Set image to Colorboard mode.Acceptable [ACK] [CR]ResponseUnacceptable “ ”[CR]6.43. POINTER RIGHT CommandCommand “C3A” [CR]DetailMove the Pointer of On-Screen Display Menu to the right.This command works differently from the pointer “>” of the projector and remotecontrol, and has no function of Volume +.Acceptable [ACK] [CR]ResponseUnacceptable “ ”[CR]6.44. POINTER LEFT CommandCommand “C3B” [CR]DetailMove the Pointer of On-Screen Display Menu to the left.This command works differently from the pointer “<” of the projector and remotecontrol, and has no function of Volume +.Acceptable [ACK] [CR]ResponseUnacceptable “ ”[CR]6.45. POINTER UP CommandCommand “C3C” [CR]Detail Move up the Pointer of On-Screen Display Menu.This command works the same way as the pointer “▲” of the projector.Acceptable [ACK] [CR]ResponseUnacceptable “ ”[CR]