Sanyo PLC-XU4000 Owner's Manual

Also see for PLC-XU4000: Specification sheet Manual Manual Dimensional drawing Command list

Contents

14InstallationConnecting to a ComputerCables used for connection• VGA Cables (Mini D-sub 15 pin) *• Audio Cables(*One cable is supplied; other cables are not supplied with the projector.) Note:• When the MIC function is set to Off in the Sound menu, the MIC function is disabled. (p 24)• When MIC is set to On in Sound Menu, COMPUTER AUDIO IN 1, COMPUTER AUDIO IN 2 / MIC IN andAUDIO IN(L/R) terminals can be connected at the same time. At this time, COMPUTER AUDIO IN 2 termianlas MIC input. (p 24)• Input sound to the COMPUTER AUDIO IN 1, COMPUTER AUDIO IN 2 / MIC IN terminals when using theCOMPUTER IN 2 / MONITOR OUT and the COMPUTER IN 1/ COMPONENT IN terminal as input.• When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available.• When the cable is of the longer variety, it is advisable to use the COMPUTER IN 1 / COMPONENT IN andnot the COMPUTER IN 2/ MONITOR OUT.Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables.External Audio EquipmentAudio cable(stereo)Audio cable(stereo)Monitor Input Audio OutputCOMPUTER 1/COMPUTER 2AUDIO IN (PC or MIC)AUDIO OUT(stereo)Audio Input VGAcableCOMPUTERIN 2COMPUTER IN 1 /COMPONENT INVGAcableMonitor Output Monitor OutputVGAcableMONITOROUTThis terminal isswitchable. Set upthe terminal as eitherComputer input orMonitor output.(See Page 51.)