Sanyo PLC-XU4000 Owner's Manual

Also see for PLC-XU4000: Specification sheet Manual Manual Dimensional drawing Command list

Contents

59Input Source Information DisplayThe Information Menu is used for checking the status of the image signal being projected and the operation of the projector.H-sync freqV-sync freqLamp counterInformation MenuThe horizontal frequency of the input signal is displayed inKHz, or - - - - KHz when no signal.The vertical frequency of the input signal is displayed in Hz,or - - - - Hz when no signal. Numbers of Hz doubles whenduring Interlace.The cumulative lamp operating time is displayed.Press the INFO. button on the remote control to display theInformation Menu.INFO buttonRemote ControlPress the Point ▲▼ buttons to select the Information. TheInformation Menu is displayed.See below for displayed information.Power managementScreenOff, Ready, Shut down or Timer is displayed.The selected screen size is displayed.InputLamp statusThe selected input source is displayed.The selected lamp mode is displayed.InformationLanguageThe selected language is displayed.Key lockThe selected Key lock icon is displayed.PIN code lockOff or On 1 or On 2 is displayed.Remote controlThe selected remote code is displayed.SERIAL NOThe serial number of the projector is displayed. The serialnumber is used to service the projector.Total power savingsThe saved amount of power and the exhausted CO2 aredisplayed.Direct OperationMenu Operation