20BEFORE OPERATIONHOW TO OPERATE ON-SCREEN MENUFLOW OF ON-SCREEN MENU OPERATIONDisplay ON-SCREEN MENUPress MENU button to display ON-SCREEN MENU (MENUBAR). A red frame is POINTER.Move POINTER (red frame) to MENU ICON that you want toselect by pressing POINT RIGHT / LEFT buttons.Adjust ITEM DATA by pressing POINT RIGHT / LEFTbuttons.Refer to following pages for details of respectiveadjustments.Press POINT UP/DOWN button and move POINTER (redframe or red arrow) to ITEM that you want to adjust, and thenpress SELECT button to show ITEM DATA.Select Menu to be adjustedControl or adjust item through ON-SCREEN MENU1243You can control and adjust this projector through ON-SCREENMENU. Refer to following pages to operate each adjustment onON-SCREEN MENU.2 MOVING POINTER3 SELECT ITEMMove pointer (✽ see below) or adjust value of item by pressingPOINT button(s) on Side Control or on Remote Control Unit.Select item or set selected function by pressing SELECT button.OPERATING ON-SCREEN MENU✽ Pointer is a icon on ON-SCREEN MENU to select item. See fig-ures on section "FLOW OF ON-SCREEN MENU OPERATION"below. MENUAUTO PC ADJUST IMAGESELECTLENS SHIFT IIUsed to select item.SELECT BUTTONUsed to move PointerUP/ DOWN/ RIGHT/LEFT.POINT BUTTONSSIDE CONTROLMENU BAR MENU ICONSELECTBUTTON1 DISPLAY MENUPress MENU button to display ON-SCREEN MENU.RESETFOCUSZOOMON-OFFSELECTUsed to select item.SELECT BUTTONUsed to move PointerUP/ DOWN/ RIGHT/LEFT.POINT BUTTONWIRELESS REMOTE CONTROLITEM DATAPress POINT LEFT/RIGHTbuttons to adjust value orset function.POINTER (red frame)Press POINT DOWN button tomove POINTER.POINTER(red frame)ITEMMENU BUTTONMENU BUTTON