Sanyo PLV-HD10 Owner's Manual

35SETTINGSETTING MENUPress MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT button(s) to move a red-frame pointer toSETTING icon.12LanguagePress POINT DOWN button to move a red-frame pointer to itemthat you want to set and then press SELECT button. Settingdialog box appears.When pressing SELECTbutton at Language,Language Menu appears.SETTING MENULanguage used in ON-SCREEN MENU is selectable from amongEnglish, German, French, Italian, Spanish, Portuguese, Dutch,Swedish, Russian, Chinese, Korean and Japanese.SETTING Menu iconSet a red framepointer to item andpress SELECTbutton.Lamp ModeThis Projector is equipped with 4 Projection Lamps and a number ofusing lamps can be switched to 4 lamps or 2 lamps. Using 2 lampsmaintain life of Projection Lamps.To change over Lamp Mode1. Press MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT buttons to select SETTING and pressSELECT button. Setting dialog box appears.2. Press POINT DOWN button to move a red frame pointer to“Lamp mode”. Set "4 lamps mode" or "2 lamps mode" bypressing POINT LEFT/RIGHT button(s). When Lamp Mode isset from "4 lamps mode" to "2 lamps mode" image becomes littledarker. When Lamp Mode is set from "2 lamps mode" to "4lamps mode" image become brighter gradually.DisplayThis function decides whether to display On-Screen Displays.On ··· Shows all the On-Screen Displays.Off ··· Sets On-Screen Displays disappeared except; ON-SCREEN MENU “Power off?” message P-TIMER “No signal” message “Wait a moment” messageBlue backWhen this function is “On,” this projector will produce a blue imageinstead of the video noise on the screen when any input source isunplugged or turned off. Move a pointer to itemand then press POINTLEFT/RIGHT button(s).Optional Control NumberRefer to page 11.Menu sizeThis function decides to display On-Screen Displays size.Normal ··· Shows normal size the On-Screen Displays.Double ··· Shows double size the On-Screen Displays.