Sanyo PLV-HD10 Owner's Manual

31DISPLAY ADJUSTPress SELECT button to show information of computer selected.Current modeAdjusts clamp position. When image has a dark bar(s), try thisadjustment.ClampPress SELECT button at Currentmode icon to show information ofcomputer connected.Current modePress SELECT button at this iconto display previous items.ResetStoreCloses DISPLAY ADJUST MENU.QuitOther icons operates as follows.3To store adjustment parameters, move a red frame pointer toStore icon and then press SELECT button. Move a red arrowpointer to any of Mode 1 to 20 that you want to store and thenpress SELECT button.Reset all adjust parameters on adjustment dialog box to previousfigure.Mode freeTo store adjustment data.To clear adjustment data.To clear adjustment parameters previously set, move a redframe pointer to Mode free icon and then SELECT button. Movea red arrow pointer to Mode that you want to clear and thenpress SELECT button.Mode free iconStore iconVacant ModeShows values of “Total dots”“Display area H” and “Displayarea V”.Terminal board andSystem of input signal.Press POINT LEFT/RIGHTbuttons to display right page.Press POINT UP/DOWN buttonsto display next/previous page.Close thisdialog box.This Mode has parametersbeing stored.Shows values of scale and positionof “Aspect H” and “Aspect V” .