18BEFORE OPERATIONOPERATION OF REMOTE CONTROLRESETFOCUSZOOMON-OFFSELECTqwyu!0ertoi!2!3!4!6!7!8!5!9!1!9 RESET switchSlide this switch to the "RESET" to initialize the remote control code.(P19, 39)w SIGNAL EMISSION indicatorThis indicator lights red while a signal is being sent from the remote controlto the projector.e SCREEN buttonSelect image screen. (P28)r ZOOM buttonAdjust zoom. (P23)!7 INPUT 1-4 buttonsSelect input source (INPUT 1-INPUT 4). (P25)i POINT (UP/DOWN/LEFT/RIGHT) buttonSelects an item or adjusts value in the On-Screen Menu. (P20)Point Left/Right button are also used as VOLUME +/- button. (P24)!0 IMAGE (1-10) buttonsSelects image levels (IMAGE 1 - IMAGE 10). (P32)!3 AUTO PC buttonOperates the Auto PC adjustment function. (P29)!4 NO SHOW buttonTurns the picture into black image. (P23)!5 MENU buttonOpens or closes the On-Screen Menu. (P20)t FREEZE buttonFreezes the projected picture. (P23)y MUTE buttonMutes sound. (P24)!2 POWER ON-OFF buttonTurns the projector on or off. (P22)!6 LENS SHIFT buttonSelect LENS SHIFT function. (P23)u FOCUS buttonAdjust focus. (P23)!8 IMAGE buttonSelects image levels. (P32)q SELECT buttonExecutes the item selected. (P20)!1 WIRED REMOTE JACKWhen using as Wired Remote Control, connect Remote Control Cable tothis jack.Battery installation is required when using as Wired Remote Control.o SELECT buttonExecutes the item selected. (P20)