9PREPARATIONPOSITIONING PROJECTORBefore setting up a projector, install Projection Lens on a Projector.1. Before installation, check where a projector is used and prepare suitable lens. For specifications of ProjectionLens, refer to manual separately attached or contact sales dealer where you purchased a projector.2. For installation, refer to installation manual supplied to a Projector.LENS INSTALLATIONWhen moving or setting up a projector, be sure to replace a Lens Cover to protect a surface. And becareful not to hold or subject a lens to strong forces. It may damage lens, cabinet, or mechanicalparts.Projection lens can be moved up, down, left and right with motor-driven lens shift function. This function makesit easy to provide projected image where you want.LENS SHIFT ADJUSTMENTMOVED UP OR DOWN MOVED LEFT OR RIGHTUse LENS SHIFT button andPOINT UP/DOWN button tomove image up or down.(Refer to page 23.)Use LENS SHIFT button andPOINT LEFT/RIGHT button tomove image left or right.(Refer to page 23.)This projector is designed to project on a flat projectionsurface.ROOM LIGHTBrightness in room has a great influence on picturequality. It is recommended to limit ambient lighting inorder to provide best image.This projector is equipped with cooling fan to protect it from over-heating. Pay attention to following to ensure proper ventilationand avoid a possible risk of fire and malfunction. Do not cover vents with papers or other materials. Keep rear grill at least 3.3 feet (1 m) away from anyobject. Make sure that there are no objects under a projector.An object under a projector may prevent a projectorfrom taking cooling air through bottom vent.VENTILATIONAIR INTAKE VENT(BOTTOM SIDE)EXHAUST VENT(REAR SIDE)SCREEN