Sanyo PLV-WF10 Service Manual
Also see for WF10 - PLV WXGA LCD Projector: Owner's manualSpecifications
                                                                                                                                     | |
Contents
|
- 107 -NOTE : The installation procedure and needed partsfor lens installation depend on the type of theProjection Lens. Check the Model No. of theProjection Lens and be sure to install or replace thelens following procedure below.1 Remove Lower Lens Cover. Remove 2 Screws A.Push part B and pull Lower Lens Cover down.(See Fig. 1.)2 Remove 4 Screws C. Pull Upper Lens Covertoward front and remove. (See Fig. 2.)3 Remove 2 Screws D and Cover Plate on the backof Upper Lens Cover. (See Fig. 3.)LENS REPLACEMENT AND INSTALLATION PROCEDUREACCBFig-3Fig-1Fig-2UPPER LENSCOVERCOVER PLATEUPPER LENSCOVERLOWER LENSCOVERD |
Related manuals for Sanyo WF10 - PLV WXGA LCD Projector
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine