Sanyo PLV-WF10 Service Manual

Also see for WF10 - PLV WXGA LCD Projector: Owner's manual Specifications

-37-Not designated PC AV Component200-11 & 12 PC White balance adjustment. 2 lamp mode 210-11 & 12 AV White balance adjustment. 2 lamp mode 211-11 & 12 AV White balance adjustment. Lamp-1 of 1 lamp mode 212-11 & 12 AV White balance adjustment. Lamp-2 of 1 lamp mode 1000-25 AV Color adjustment 1000-24 AV Tint adjustment 1010-0 AV Green Video signal adjustment 1010-1 AV Green Video signal adjustment 1010-2 AV Red Video signal adjustment 1010-3 AV Red Video signal adjustment 1010-4 AV Blue Video signal adjustment 1010-5 AV Blue Video signal adjustment 0-0 Temperature monitor IC5801 Read only 0-1 Temperature monitor IC2561 Read only 1-0 Atmospheric Pressure monitor IC886 Read only 10-0 RS232C Baud rate (0:9600 / 1:19200) 10-1 RS232C RTS/CTS Flow Control (0:Disable / 1:Enable) 111-0 Lamp-1 Lamp illumination time Read only 111-1 Lamp-2 Lamp illumination time Read only 930-0 Lamp mode 2 (Full) Lamp Mode (See Note.) 930-1 Lamp mode Lamp-1 of 1 Lamp Mode (See Note.) 930-2 Lamp mode Lamp-2 of 1 Lamp Mode (See Note.) 998-0 Grid Test Pattern Display Group & Item No. Adjustment Item Input ModeNote : Group-no. 930 If the data value appears "11" on the screen, the lampmode is selected. If the data value appears "0" on the screen, the lampmode is not selected. Set the data value to "10." If the data value appears "99" on the screen, it is periodfor cooling of the lamp. Wait until it is changed to "0."Then set the data value to "10."Caution :Other adjustment items are not related to service and a main-tenance. Don't change the data values of those adjustmentitems. Otherwise it may cause loss of product safety.