Sanyo PLV-WF10 Service Manual

Also see for WF10 - PLV WXGA LCD Projector: Owner's manual Specifications

-58-Read description in the Capacitor and Resister as follows:CAPACITOR16 K K 0.47 BACharacteristicRated valueRated VoltageFIXED RESISTER1/10 G J 100KRated WattageChip transistor (list of replaceable)Tolerance SymbolsStatic capacitance of 10PF or lessA: NondesignatedB: ±0.1PFC: ±0.25PFD: ±0.5PFF: ±1PFG: ±2PFH: +0.1 ~ -0PFL: +0 ~ -0.1PFR: +0.25 ~ -0PFS: +0 ~ -0.25PFE: +0 ~ -1PFJ: ±5%K: ±10%M: ±20%Note: J. K. and M are used only fortubular Ceramic CapacitorsStatic capacitance of more than10PFA: NondesignatedB: ±0.1%C: ±0.25%D: ±0.5%F: ±1%G: ±2%E: ±2.5%H: ±3%J : ±5%K: ±10%L : ±15%M: ±20%N: ±30%P: +100 ~ -0%Q: +30 ~ -10%R: +20 ~ -0%T: +50 ~ -10%U: +75 ~ -10%V: +20 ~ -10%W: +100 ~ -10%X: +40 ~ -20%Y: +150 ~ -10%Z: +80 ~ -20%Material :C CERAMIC Temperature compensating ceramicK CERAMIC High dielectric rate ceramicB CERAMIC Semiconductor ceramicZ MT-PAPER Metallized paperF POLYESTER PolyesterG MT-POLYEST Metallized polyesterN POLYPRO PolypropyleneM MT-POLYPRO Metallized polypropyleneY COMPO FILM Composite filmH MT-COMPO Metallized composite filmS STYRENE StyrolT TA-SOLID Tantalum oxide solid electrolyticA AL-SOLID Aluminum solid electrolyticE ELECT Aluminum foil electrolyticP NP-ELECT Non-polarized electrolyticU OS-SOLID Aluminum solid capacitors with organic semiconductive electrolyteV POS-SOLID Polymerized organic semiconductorD DL-ELECT Electric double layer electrolyticJ AL-SOLID Aluminum manganese wind solidL PPS-FILM Polyphenylene sulfide filmQ MT-PPS-FILM Metallized Polyphenylene sulfide filmR MT-PEN-FILM Metallized polyethylenenaphthalate filmW EP-ELECT Electric Conductor Polymerized Aluminum foil electrolyticX CAPACITOR OtherMaterial :D CARBON Carbon film fixedN MT-FILM Metal film fixedS OXIDE-MT Metal oxide film fixedC SOLID SolidG MT-GLAZE Metal glaze type fixedW WIRE WOUND Power type covered wiring fixedH CERAMIC RES Ceramic fixedF FUSIBLE RES FusibleX RESISTER Used for "others"Tolerance Symbols:A: ±0.05%B: ±0.1%C: ±0.25%D: ±0.5%F: ±1%G: ±2%J: ±5%K: ±10%M: ±20%P: +5 ~-15%Z: Use when 0 ohmRated value, ohms : K: x1,000 ohms.M: x1,000,000 ohmsMark AH2SC2812-L62SC2812-L72SC2412K-R2SC2412K-SMark AJ2SA1179-M62SA1179-M72SA1037K-R2SA1037K-S2SA1037AK-R2SA1037AK-SThe cautions in schematic diagrams