Sanyo PLV-Z2 Owner's Manual

Also see for PLV-Z2: Service manual Service manual Service manual Service manual

Contents

25Video InputInput 2Input 1INPUT buttonInput Source Selection (INPUT 2 Terminal/HDCP, Component, Scart)Choose Input 2 by pressing the INPUT button on the top control or onthe remote control. Before using these buttons, correct input sourceshould be selected through menu operation as described below.Direct OperationMENU INPUTSELECTTop Control Remote ControlINPUT buttonINPUT buttonSelect the Input Menu with the Point Up/Down button, and thenpress the Point Right button to enter the sub-menu.Select Input 2 with the Point Up/Down button and then pressthe Point Right button. The Source Select Menu will appear.12Move the pointer to the source that you want to select and thenpress the SELECT button.3When the input source compatible with HDCP iscoming from video equipment through the DVI ter-minal, select RGB (AV HDCP).RGB (AV HDCP)Menu OperationInput MenuSource Selection MenupointerCloses the source selection menu.When the input source is coming from videoequipment connected to the DVI terminal with aComponent-DVI Cable, select Component.ComponentWhen the input source is coming from videoequipment connected to the DVI terminal with aScart-DVI Cable, select RGB (Scart).RGB (Scart)NOTE HDCP (High-bandwidth Digital Content Protection) is a system forprotecting digital entertainment content delivered by DVI (Digital VisualInterface) from being copied.The specification of HDCP is decided and controlled by Digital ContentProtection, LLC. Should the specification be changed, this projector maynot display the digital content protected by HDCP. Component-DVI Cable and Scart-DVI Cable are options. See page 55 fororder.