Sanyo PLV-Z2 Owner's Manual

Also see for PLV-Z2: Service manual Service manual Service manual Service manual

Contents

37Computer InputImage Level AdjustmentSelect the Image Adjust Menu with the Point Up/Down button,and then press the Point Right button to enter the sub-menu.12 Select an item with the Point Up/Down button and press thePoint Left/Right button to adjust the item.Press the Point Left button to decrease contrast and the Point Rightbutton to increase contrast. (From -31 to +31)Press the Point Left button to adjust image darker and the Point Rightbutton to adjust image brighter. (From -31 to +31)ContrastBrightnessPress the Point Left/Right button to obtain better balance of contrast.(From -7 to +7)GammaPress the Point Left button to soften the image and the Point Rightbutton to sharpen the image. (From -7 to +7)SharpnessPress the Point Left button to lighten red tone and the Point Rightbutton to deepen red tone. (From -31 to +31)White balance (Red)Press the Point Left button to lighten green tone and the Point Rightbutton to deepen green tone. (From -31 to +31)White balance (Green)Press the Point Left button to lighten blue tone and the Point Rightbutton to deepen blue tone. (From -31 to +31)White balance (Blue)Press the Point Left/Right button for Color temperature level that youwant to select. (High, Mid, Low1, Low2, Low3)Color temp.When this function is "ON", it automatically enhances contrast ofbright and dark part of image.Auto grayscaleTo store the adjustment data, select Store and press the Point Rightbutton. The Image Level Menu will appear. Choose one of 4 imagelevels with the Point Up/Down button and press the SELECT button.A confirmation box will appear and select [Yes].Resets all adjustment to their previous figure.ResetStoreImage Adjust MenuThis arrow indicates that thereare other item menus.Press the SELECT button toadjust the next item.Press the MENU button toreturn to the previous On-Screen Menu and store theadjusted value.The Image Level Menu willappear. Choose one of 4image levels with the PointUp/Down button and press theSELECT button. A confirma-tion box will appear and select[Yes].Press the Point Right button atthis icon to store the value.NOTE You can also adjust items with the IMAGE ADJ. (IMAGE) button on theremote control. (p12)