Sanyo PLV-Z2 Owner's Manual

Also see for PLV-Z2: Service manual Service manual Service manual Service manual

Contents

38Computer InputThis projector has a useful function to resize a projected screen.When Digital zoom is selected, the On-Screen Menu disappears andthe message “D.Zoom” is displayed. Press the SELECT button toexpand the image. And press the POINT UP/DOWN/LEFT/RIGHTbutton(s) to pan the image. The panning function can work only whenthe original image is larger than screen size (1280 x 720).FullDigital zoomNOTE You can also resize a projected screen with the SCREEN (SCR) button onthe remote control. (p12) This Screen Menu cannot be operated when “720p (HDTV)”, “1035i(HDTV)”, or “1080i (HDTV)” is selected in the PC System Menu (p32). The True and Digital zoom cannot be selected when “480i”, “575i”,“480p”, or “575p” is selected in the PC System Menu (p32). This projector cannot display any resolution higher than 1280 X 720. If yourcomputer’s screen resolution is higher than 1280 X 720, reset the resolutionto the lower before connecting to the projector. The image data in other than the resolution (1280 x 720) is modified to fitthe screen size in initial mode. The panning function may not operate properly if the computer systemprepared in the PC Adjust Menu is used.Provides image to fit screen size.NormalTrueScreen MenuProvides image in its original size. When the original image size islarger than the screen size (1280 x 720), this projector enters “Digitalzoom” mode automatically.Provides an image to fit the horizontal size of the screen.Screen Size AdjustmentSelect the Screen Menu with the Point Up/Down button, andthen press the Point Right button to enter the sub-menu.Select an item with the Point Up/Down button and press thePoint Left/Right button to set the screen size.12