Sanyo PLV-Z2 Owner's Manual

Also see for PLV-Z2: Service manual Service manual Service manual Service manual

Contents

34Computer InputSome computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Thisprojector has Manual PC Adjustment to enable you to precisely adjust several parameters to match those signal formats.The projector has 5 independent memory areas to memorize those parameters manually adjusted. This enables you torecall the setting for a specific computer whenever you use it.Select the PC Adjust Menu with the Point Up/Down button, andthen press the Point Right button to enter the sub-menu.12 Select an item with the Point Up/Down button and press thePoint Left/Right button to adjust each item.PC Adjust MenuAdjusts an image as necessary to eliminate flicker from the display.Press the Point Left/Right button to adjust value. (From 0 to 31)Fine syncAdjusts the number of total dots in one horizontal period. Press thePoint Left/Right button and adjust number to match your PC image.Total dotsAdjusts horizontal picture position. Press the Point Left/Right buttonto adjust the position.HorizontalAdjusts vertical picture position. Press the Point Left/Right button toadjust the position.VerticalPress the Point Right button to show the information of theconnected computer.Current modeAdjusts clamp level. When the image has dark bars, try thisadjustment.ClampShows status(Stored / Free) of theselected Mode.Selected ModeComputer Adjustment (Manual)Go on to the next page...Press the SELECT button toadjust the next item.Press the MENU button toreturn to the previous On-Screen Menu and store theadjusted value.This arrow indicates that thereare other items. Select thisitem and press the Point Downbutton to go to the next item.