Sanyo PLV-Z2000 Owner's Manual

Also see for PLV-Z2000: Owner's manual Service manual

Contents

29Press the Point 7 button to decrease the sharpness of the image;press the Point 8 button to increase the sharpness of the image(from -7 to +7).SharpnessLamp controlUse the Point 7 8 buttons to adjust the gamma value to obtain abetter balance of contrast (from -7 to +7).GammaAn interlaced video signal can be displayed in progressive. Use thePoint 7 8 buttons to select the desired options.Off . . . . . Disabled.Mode1 . . For moving pictures.Mode2 . . For still pictures.Film . . . . For watching a film. With this function, the projectorreproduces pictures faithful to the original film quality;it operates on 3-2 and 2-2 pulldown video sources.ProgressiveThis function allows you to change the brightness of the screen.Use the Point 7 8 buttons to select the desired lamp mode. Youcan also select the lamp mode by pressing the LAMP CONTROLbutton on the remote control.Normal . . . . . Normal brightness.Auto 1 . . . . . The brightness according to the input signal.Auto 2 . . . . . Less bright and lower-sound than Auto 1.Eco. . . . . . . . Lower brightness reduces the lamp powerconsumption.The lamp mode is automatically switched to “Eco” under no signalinput.Noise reductionPress the Point 7 button to lighten red tone; press the Point 8button to deepen red tone (from -31 to +31).White balance (Red)Press the Point 7 button to lighten green tone; press the Point 8button to deepen green tone (from -31 to +31).White balance (Green)Press the Point 7 button to lighten blue tone; press the Point 8button to deepen blue tone (from -31 to +31).White balance (Blue)✔Note:• If any one of the White balance (Red, Green, or Blue) are adjusted,the Color temp. level changes to “User.”• Progressive cannot be selected with the computer input and whenthe video signal format is 480p, 575p, 720p, or 1080p.Press the Point 8 or OKbuttons to display theAdvanced menu.Go on to the next page....Image AdjustmentNoise interference on the screen can be reduced. Press the Point7 8 buttons to change the noise reduction mode.Off . . . . Noise reduction mode is “Off”On . . . . Noise reduction mode is “On”Use the Point 7 8 buttonsto adjust the settingvalues and press the OKbutton.If you press the Point dbutton, the next item canbe selected.The selected item.Press the Point 8 or OKbuttons to access theselected item. The adjust-ment bar is displayed.Downloaded From projector-manual.com Sanyo Manuals