TCL L32E5300/MT27S-AP/CSTM E3 Service Manual

MT27S-AP/LA Chassis Aliment procedurePRELIMINARY INFORMATION ----- SUBJECT TO CHANGE 9Color Analyzer CA-210. Video Pattern Generator Chroma2329. Color TV PatternGenerator PM5418, VGA cable, AV cable(RCA),YPBPR(RCA) cable. Ǆ Chroma2329 Fluke5418 CA-210According to the requirement of order, we suggest take the below steps to finishthe appropriate settings.A enter the Factory Menu, enable HOTKEYB Check the version of software, release date displayed at the bottom of FactoryMenu. If the information is correct, you can ignore step C and D.C Enter Factory Menu, choose DESIGNMENU1->PROJECT ID, choose correspondingProject ID number of the product (Please refer to the description in BOM aboutProject ID number).D return to DesignMenu1, check the Product model.E choose Factory Menu-> NVM RESET and press and wait until prompt OKappears.F restart the setG according to the requirement of order, set the items of Hotel Menu etc.H After aging under normal temperature, adjust white balance.I choose Factory Menu-> SHOP INIT and press button of remote control toinitialize the set.Note: after step I (execute SHOP INIT), Hotel Menu will be disabled by default.Therefore, if order requires hotel function, it is necessary to enable hotel function byset Factory Menu-> DesignMenu2->HOTEL MENU ENABLE to ON.Before adjustment, you must ensure Color Analyzer has been calibrated. Only AV1,YPBPR, VGA , HDMI 1 need to be adjusted. It is necessary to adjustment HDMI 1firstly.a. signal and generatorThe pattern of the signal should be used are White (Chroma2329 pattern113) andGrey (pattern 114).The format of signal are respectively 720p for HDMI1(Chroma2329 Timing 69), NTSC for AV1 (Chroma2329 Timing 37),1024×768@60Hz5. The steps of debugging5.1 Device5.2 steps of debugging˖5.3 White Balance adjustment (Manual)˖