8Indicators and Display Functions Indicates that your radio has received a Selcall call. If the indicator is flash-ing, your radio received a call which you were unable to answer. Your radiomay be programmed to display your caller's identity. Indicates that your radio is ready for you to select a status code relating toyour current activity. You may use the Up and Down ( / ) scrollkeys to choose a status code or description from a list. Indicates that your radio is ready for you to enter information to enable it toselect a new channel. You may use the Up and Down ( / ) scrollkeys to choose from a list, the Alphanumeric ( ) key to enter a label,or the number keys. If the indicator is flashing, the current channel is inRepeater Talkaround mode. Indicates that you can enter information, such as a channel label, from thekeypad, using letters or numbers. If this indicator is on continuously, the signalling mute (if active) is open. Thismay be because either the microphone is off-hook, or you have pressed theMonitor ( ) key. If the indicator is continually flashing, the Monitor keyhas been pressed for long enough to open the RF squelch.Note: When the radio is operating normally, this indicator is off. Indicates the state of the auxiliary options switch. Depending upon the pro-grammed configuration of the auxiliary options switch, this indicator may beeither on continuously or off continuously, or may only come on while theAuxiliary ( ) key is pressed down. Indicates that you can change the user programmable options. The displaywindow shows the option last viewed. You may use the Up and Down ( /) scroll keys to move through the options, then select one with theEnter ( ) key. Indicates you have pressed the Enter ( ) key.When these indicators are all off, the radio is in DTMF mode. It can nowtransmit DTMF tones, entered via the keypad.STATChFnCALL, STATUS, CHAN-NEL, ALPHANUMERIC &FUNCTION indicators alloff

Introduction

safety training information

key functions

Indicators And Display Functions

Display Window

switching the radio on and off

selecting a group

making a call

scanning channels

To Stop Scanning

group calls

Receiving a Selcall Call

Advanced User Operations

repeater talkaround

Sending DTMF Tones (DTMF Option Fitted)

User Programmable Scan

Call Queuing (Selcall Option Fitted)

Exiting the Call Queue

Changing the Selcall Status Code (Selcall Option Fitted)

Exiting Call Diversion Mode

Making a Call to a Radio in Diversion Mode

Altering User Options

troubleshooting

Tait T2020 Series II Operator's Manual

T2020 Series II