Tait T2020 Series II Operator's Manual

Also see for T2020 Series II: User guide

16STAT ChFnαT2000II6. After the call is sent, you may hear an acknowledging tone,beep, or series of tones from the otheruser’s radio, indicating that your call has been received. If you do not hear a tone, either the otheruser's radio is incapable of generating the acknowledging tone, or it is off, or they are out of rangeof your call.Your T2020II may be programmed to display the status of the called unit, as follows:Status displayed Explanation‘-NO ACK-’ No acknowledge sequence was detected.‘NO STAT’ An acknowledge sequence was detected but no status information was de-coded.Status message An acknowledge sequence was detected and the decoded status numbercan be identified.Status number An acknowledge sequence was detected and the decoded status numbercannot be identified.If any control head activity is detected before any of the above messages are displayed, the acknowl-edge sequence is no longer expected, and messages will therefore no longer be displayed.Group CallsIf you wish to call a group of other users, you may do so by dialling the digits common to all members ofthe group and then using the # character as a substitute for all the remaining digits. If you are not surewhether this facility has been programmed into your radio, consult your Tait dealer.