22STAT ChFnαT2000IIUser Programmable ScanDepending on how your T2020II is programmed, you may be able to change the channels that areincluded in your scan group. Existing channels can be removed and new channels can be added, asrequired.Edit the user programmable scan group, as follows:1. Press the Function ( Fn ) key.2. Scroll through the items in the display window using the Upand Down ( / ) keys, until ‘PROG GRP’ is dis-played.3. Press the Enter ( ) key. The name of the group isdisplayed, and the top row of indicators is illuminated.4. Press the Enter key a second time to start the editing thegroup.5. Press the Up and Down keys to scroll through all the available channels. The SCAN indicatorindicates those channels that are included in the user programmable scan group, and a flashingSCAN indicator indicates the home channel.6. To add or delete a channel from the scan group, select the required channel and then press theEnter key.Note: A scan group must contain 2 to 16 channels.The home channel is defined by selecting a channel and then holding the Enter key for longer than 1second. The SCAN indicator then flashes.Note: You can only delete a normal channel from the scan group. If the home channel is to be deletedfrom the scan group, you first have to define another channel as home channel and then deletethe original home channel.7. Once the group editing is complete, press the Function key to return to the Function menu.8. Press a mode key to switch to another mode, if desired. Alternatively, the inactivity timer returnsthe radio to the normal operating mode if no operator activity has been detected for 10 seconds.