Tait T2020 Series II Operator's Manual

Also see for T2020 Series II: User guide

243. Press the Enter key, and the caller identity of the entry in the display window appears. Again, youcan use the Up and Down keys to scroll through the list of entries, and the Zero key to delete theentry from the queue.4. Press the Enter key again when the caller identity of the entry is being displayed, and call-back isinitiated. The entry is then automatically removed from the queue. Note that the call-back se-quence is based on the caller identity.Exiting the Call QueueExit Call Queue Entry mode by pressing any mode key, including the Function ( Fn ) key.The radio automatically exits from Call Queue Entry mode, and reverts to the Function menu, if the lastentry in the call queue is deleted. This can be done either by using the Zero key, or making a call-back.Queuing CallsThe caller identity and the channel of the received call is put in the call queue when: The internal alert (ringing) of the received call stops Another call is received before the previous one is queued.Note: After the incoming call has been queued, it is automatically cleared or answered, and the radioresumes what it was doing prior to receiving the call. This includes the resumption of scanning,if the radio was scanning prior to receiving the call.Call Queue FullWhenever the queue is full, the radio continues to receive calls, but does not resume what it was doingprior to receiving the call (e.g. scanning). This allows calls to be received only on the held channel.Subsequent calls that are received overwrite the information about the previous call.